Calculate occupant load, required exits, egress widths and travel distances under NCC Part D1.
Enter the building class, floor area and provisions and the egress tool computes the occupant load, the minimum number of exits, the aggregate and per-exit doorway, stairway and corridor widths, and the maximum travel distances - sprinklered and non-sprinklered.
It also covers accessible egress under AS 1428.1 and NCC Part D3, including the number of accessible exits and the door-swing rules that apply.
The Exit & Egress Design tool is a professional aid. Verify all outputs against the current National Construction Code and the relevant Australian Standards, and have them certified by a suitably qualified practitioner before use.
Determine every required fire system for any building - each with its NCC clause and a rough order-of-magnitude cost estimate.
Size the AS 3745 warden team and generate emergency procedures and evacuation-diagram checklists.
Generate the formal essential fire safety measures schedule for Construction Certificate submissions - in the correct format for every Australian state.
The Exit & Egress Design tool is built around NCC D1, AS 1428.1, with the relevant clauses cited on every output. Always verify results against the current National Construction Code and Australian Standards.
Yes - the Exit & Egress Design tool is one of the nine tools in the Fire & Building Compliance Suite, included in every plan of the Fire & Building Compliance Suite - from $49/month billed annually, with a 14-day free trial.
All 9 tools, one subscription. Start a 14-day free trial - no credit card required.
Start Your 14-Day Free Trial